Design and Analysis of Single-Bit Ternary Matched Filter

Wireless Personal Communications - Matched filtering has found its way in many diverse applications such as communication, signal processing and more. The emphasis of this paper is on the design...     

不同粒度纳米碳酸钙的可控制备

不同粒度的纳米碳酸钙具有不同的特性和应用范围,目前不同粒度纳米碳酸钙的可控制备方法还未见报道。以氯化钙、碳酸铵为原料,以乙醇、柠檬酸和焦磷酸钠为分散剂,采用复分解法研究了不同制备条件对纳米碳酸钙粒径的影响规律,在此基础上制备出平均粒径为17~71 nm的碳酸钙,并对其进行了表征。实验结果表明,所制备的纳米碳酸钙均为球霰石型,纯度很高,而且形貌近似球形。制备条件对纳米碳酸钙的粒径有显著的影响：随着反应温度升高,纳米碳酸钙的粒径减小;随着氯化钙滴加时间的增加,纳米碳酸钙的粒径增大;随着反应物浓度的提高,纳米碳酸钙的粒径先减小后增大;当分散剂为柠檬酸和焦磷酸钠的混合溶液时所得纳米碳酸钙的粒径最小,当分散剂为乙醇和焦磷酸钠的混合溶液时所得纳米碳酸钙的粒径最大。利用这些影响规律通过控制制备条件可以实现所需粒径纳米碳酸钙的可控制备。     

Machining characteristics of micro lens mold in laser-assisted micro-turning

Journal of Mechanical Science and Technology - Laser-assisted machining (LAM) is a type of hybrid material removal process, which is used for locally and instantaneously decreasing the hardness of...     

pH-sensitive self-assembling property of poly(ethyleneimine)/cinnamic acid mixture and its effect on pH-dependent release of monoolein cubic phase

Poly(ethyleneimine) (PEI)/cinnamic acid (CA) mixture was self-assembled into microsphere in aqueous phase. As the pH value increased, the self-assembly became hardly formed. As the molar ratio of the amino group of PEI to the carboxyl group of CA increased, the pH window for the formation of self-assembly became broader. The phase transition temperature of cubic phase was 58.5–67.5°C, depending on the PEI/CA content. The release of dye loaded in cubic phase containing PEI/CA increased in a first-order fashion. The release degree was higher at a lower pH value.     

Screen printing for support-pillar placement for vacuum glazing and the effects of pillar spacing on strength properties

Maintaining a vacuum between the two glasses to maximize the heat insulating performance, it is indispensable to array the pillar for the vacuum glazing to maintain the vacuum gap. In this paper, to investigate the effect of the spacing of the pillars arranged using the screen printing method on the strength of the glass, a bending strength test was carried out by design and fabricating a ROR bending strength test jig based on the Euro standard. In the strength test results, the experimental results were analyzed using the Weibull distribution, which is a statistical analysis method mainly used for evaluating the breaking strength of brittle material. Based on the analysis results, the placement spacing of the pillars proved validity for maintaining the vacuum glass gaps.     

Research on characteristics and effects of combustion performance by amplified ignition energy in CVCC system

Journal of Mechanical Science and Technology - This study was conducted to analyze the flame characteristics, which is generated through the combustion process according to air/propane mixture...     

Detection of fresh palm oil adulteration with recycled cooking oil using fatty acid composition and FTIR spectral analysis

There is a growing concern over the food safety issue related to increased incidence of cooking oil adulteration with recycled cooking oil (RCO). The objective of this study was to detect fresh palm olein (FPO) adulteration with RCO using fatty acid composition (FAC) and Fourier-transform infrared spectroscopy (FTIR) spectral analyses combined with chemometrics. RCO prepared in the laboratory was mixed with FPO in the proportion ranged from 1% to 50% (v/v) to obtain the adulterated oil samples (AO). FACs for FPO, RCO, and AO were determined using gas chromatography equipped with a flame ionization detector (GC-FID). The compositions of most fatty acids in RCO lied within the normal ranges of Codex standard, except for C8:0, C10:0, C11:0, C15:0, trans C18:1, and polyunsaturated fatty acids (PUFAs), C20:5. PUFAs showed a consistent decreasing trend with increasing magnitude of change with respect to increasing adulteration level and thus might be a good indicator for detecting FPO adulteration with RCO. The evaluation parameters (coefficient of determination, root mean standard error) of the FTIR-partial least square (PLS) model of palm oil adulteration with recycled oil are R² = 0.995 and 3.25, respectively. For FTIR spectral analysis, the distinct variations in spectral regions and aberrations in characteristic bands between FPO and RCO were observed. The optimized PLS calibration model developed from normal spectral of the combined region at 3602–3398, 3016–2642, and 1845–650 cm^?1 overpredict the adulteration level. On the other hand, the discriminant analysis classification model was able to classify the FPO and AO into two distinct groups. Improvement of the principles of combined techniques in authenticating AO from fresh oil is beneficial as a guideline to detect adulteration in cooking oil.     

A numerical study on the soot and combustion performance of a diesel engine with pip shape

Journal of Mechanical Science and Technology - The shape of the combustion chamber plays an important role in the formation of the air-fuel mixture in the chamber, which has a great influence on...